Product Series
Please feel free to contact us!
We look forward to your call and inquiry!
Company Address
No. 90, Weisan Road, Industrial Zone, Wen County, Jiaozuo City, Henan Province
Service Hotline
Sales call
Technical Support
Email box
ASPGLK-GD111D
- Commodity name： ASPGLK-GD111D
- Input： Dry contact or NAMUR-type proximity switch
- Number of channels： Two in, two out
- Output： Relay contacts
- Power supply mode (both can be centralized power supply)： 24VDC
Product Details
- Product Description
-
Product Introduction
Digital input isolator: accepts dry‑contact or NAMUR‑type proximity switch signals and outputs them via an isolated relay. A DIP switch allows independent configuration of the output to operate in either in-phase or out-of-phase logic (default is in-phase), and enables or disables line‑fault monitoring (default is enabled, with the LED flashing during a line fault). This product requires an independent power supply and provides three‑terminal isolation between the input, output, and power supply.
Technical Specifications
- Power Supply: 18 VDC to 32 VDC, with reverse polarity protection.
- Operating power consumption: ≤1W
- Input signal: dry contact or NAMUR-type proximity switch
- Switching characteristics: When the input current exceeds 2.1 mA, the output relay closes and the channel indicator light remains steadily illuminated in yellow; when the input current falls below 1.2 mA, the output relay opens and the channel indicator light turns off.
- Open-circuit voltage: approximately 8.5 V
- Short-circuit current: approximately 8.5 mA
- Output signal: relay contacts
- Allowable load: 250 VAC/2 A or 30 VDC/2 A
- Line fault: If the input current is ≤50 μA, it is determined to be an open‑circuit condition, and the output relay trips; if the input current is ≥6.5 mA, it is determined to be a short circuit, and the output relay trips while the channel indicator flashes red.
- Switch life: >100,000 cycles
- Switching frequency: <10 Hz
- Response time: <20ms
- Electromagnetic Compatibility: IEC 61326-3-1
- Dielectric Strength: ≥2500 VAC (between input, output, and power supply)
- Insulation resistance: ≥100 MΩ (input/output/power supply)
- Operating temperature: -20°C to +60°C
- Storage temperature: -40°C to +80°C
Product Introduction
Digital input isolator: accepts dry‑contact or NAMUR‑type proximity switch signals and outputs them via an isolated relay. A DIP switch allows independent configuration of the output to operate in either in-phase or out-of-phase logic (default is in-phase), and enables or disables line‑fault monitoring (default is enabled, with the LED flashing during a line fault). This product requires an independent power supply and provides three‑terminal isolation between the input, output, and power supply.
Technical Specifications
- Power Supply: 18 VDC to 32 VDC, with reverse polarity protection.
- Operating power consumption: ≤1W
- Input signal: dry contact or NAMUR-type proximity switch
- Switching characteristics: When the input current exceeds 2.1 mA, the output relay closes and the channel indicator light remains steadily illuminated in yellow; when the input current falls below 1.2 mA, the output relay opens and the channel indicator light turns off.
- Open-circuit voltage: approximately 8.5 V
- Short-circuit current: approximately 8.5 mA
- Output signal: relay contacts
- Allowable load: 250 VAC/2 A or 30 VDC/2 A
- Line fault: If the input current is ≤50 μA, it is determined to be an open‑circuit condition, and the output relay trips; if the input current is ≥6.5 mA, it is determined to be a short circuit, and the output relay trips while the channel indicator flashes red.
- Switch life: >100,000 cycles
- Switching frequency: <10 Hz
- Response time: <20ms
- Electromagnetic Compatibility: IEC 61326-3-1
- Dielectric Strength: ≥2500 VAC (between input, output, and power supply)
- Insulation resistance: ≥100 MΩ (input/output/power supply)
- Operating temperature: -20°C to +60°C
- Storage temperature: -40°C to +80°C
Keywords:
Please feel free to contact us!
Please provide your contact information and details, ensuring that all fields are filled in correctly. We will get in touch with you within 24 hours.
Phone:+86-(0)391-3700668
Address: No. 90, Wei San Road, Industrial Zone, Wen County, Jiaozuo City, Henan Province
WeChat Official Account